Reclaimed Wood
Poots peak wall shelf
Sold Out
I grew up under the view of poots peak in the Kenai mountain range from Homer, Alaska. Yes, as a kid I thought it was poop peak. The iconic outline...
Pedestal Table - reclaimed wood and concrete
$1,750.00
-
When we set out to build a pedestal table we wanted it to feel solid and timeless, beautiful and functional, simple and refined.
Reclaimed wood and concrete give this table a timeless feel. Concrete is used for bridges and building foundations for good reason. These reclaimed timbers spent 20 years out in the weather and should easily last another 100+ inside your home.
The seamless concrete top has an understated elegance with a smooth easy to clean surface. Reclaimed beams revealed the natural beauty of the wood grain and saw marks as they aged in the salty coastal air. The large timbers make for a very solid and stable pedestal that balances the weight of the concrete top both visually and functionally.
A simple beam post and X feet provided all the structure we needed with no visual excess.
-
Pre-cast Concrete
The table tops are poured in Homer, Alaska by Dimond Concrete.Reclaimed spruce timbers
The stock for these reclaimed wood and steel accent tables comes from old growth forests on Alaska's Kenai Peninsula. These trees were the victim of a catastrophic spruce bark beetle infestation in the 90's that decimated much of the peninsula's spruce forests. It became clear these trees either needed to be harvested or left to fall and rot. The forest fire hazard was a major concern with so many standing dead trees. We don't know the exact history of these trees but a few hundred of them made their way to an old fashioned circular saw mill that cut them into 6" x 12" and 8" x 12" beams about 12' long. They were erected as a fence on the Homer Spit where they stood for approximately 20 years. This proved to be a perfect spot for weathering the surface of the timbers with salty air, wind, and sunshine.We were fortunate to procure a large stock of these reclaimed timbers from the contractors hired to demo the fence. This wood has been a pleasure to work with and you'll find it in many of our products here at Alaskan Viking Co. from interior furniture to timber frame entryways. We also sell it by the board foot to other craftsmen.
- Table height: 30 inches
Table width: 38 inches (square)
Table weight: Approximately 130lbs
Can be disassembled for transporting.
Mantle beams - reclaimed spruce
$8.00
We have a healthy stock of 20+ year old reclaimed spruce timbers that are available for your projects. These reclaimed beams were cut at 6"x12" and 8"x12" by dimensions...
Salmon wall shelf with hooks
$675.00
-
Functional art for all the salmon lovers out there!
I set out to create something beautiful and unique that could enter your daily life.
Wood, steel, and concrete - the magic trifecta. If you haven't experienced the combination of these materials it's hard to describe. Strong, solid, hard, soft, cold, warm, smooth and textured all together.
Neighbor Rob Wiard has been producing concrete panels with salmon as a sort of ongoing experiment. I guess his enthusiasm was contagious and my imagination would not be still amongst the growing stacks of schools of salmon.
Looking around the shop I put the pieces together, first a strong steel frame to hold the heavy and solid concrete. Then warm and storied wood to soften things and create a shelf and space for the hooks.
These wall shelves with hooks will fit into entryways, bathrooms, bedrooms and. . .?
Every piece is unique and one of a kind. Small changes are made in the steel frames as materials and ideas come and go. Every concrete panel has different coloring and patterns. The wood shelf and hook boards are selected and processed to highlight unique characteristics whether driftwood cedar, live edge birch, or weathered spruce.
When you order please describe your selected piece. If I have any questions I'll contact you to clarify. Custom colors and sizes are available, Contact Us for a quote.
Accent Table - reclaimed wood and metal
$349.00
-
This peaceful little accent tables are brought to life from 100% 'scrap' material. Not that we were going to throw anything this precious away. . . ever. The combination of rusted steel and weathered spruce gives these tables a natural organic feel. We even weather the fresh metal work so that there are no glaring manufacturing marks to distract you from the natural patina. It looks like you could have found this timeless little table sitting out under a tree near a homesteaders cabin.
While making a run of dovetail beam benches we created a stack of these weathered beam end cuts by the fire. They stayed by the fire for a few months. I couldn't burn them. I loved these weathered old blocks and finally one day the inspiration came for this design. Simple and timeless, I hope you love them as much as we do.
These accent tables can be custom built to almost any size, but they are nicely balanced at around 18" tall, 11" wide, and 16" long. They make a nice end table, plant stand, side table, night stand, small coffee table, or . . ?
Barstool - Reclaimed Wood and Metal
$475.00
-
We set out to design a barstool using our stock of reclaimed 1 1/4" rusty steel, and a nice sturdy piece of reclaimed spruce. The challenge we gave ourselves was to build it without using screws, glues, or any fasteners. Here it is, a puzzle of sorts, the wood seat is captured by the steel in a secure way without the use of any fasteners. The design requires the welding of the frame to be completed after placing the seat. A small inconvenience for what we believe is an inspired and simple design.
The weathered spruce seat and rested metal gives this barstool and timeless appearance. We even weather the fresh metal work so that there are no glaring manufacturing marks to distract you from the natural patina. It could be 20 years old and you'd never know the difference.
Beam Bench - Mortise and tenon from reclaimed spruce
$999.00
-
Inspired by the material This design came to us when we were admiring the beautiful weathered end on one of our spruce beams. The beam had such an appealing curved end from a rough chainsaw cut several decades ago we just couldn't let it go to the scrap pile. We did our best to reimagine that beautiful weathered end grain into a strong and sensible piece of functional art. A design that respects the material and the character that our natural environment engraved on it.
This reclaimed beam bench features an oversized mortise and through tenon joint that is excessively strong and gives a striking contrast projecting through the stout legs. Much like our dovetail beam bench, These benches utilize a simple and obvious joint that feels honest. The oversized beams impart a solid grounding energy to any room that the photos really don't do justice to.
As you'd guess, every bench is unique due to the nature of the source material. We usually have 1-3 in stock and also build them to order with approximately 4 week turnaround.
Beam Bench - Dovetail from reclaimed spruce
$899.00
-
Simple. Strong. Honest.
We wanted to build a simple and strong bench. Just the beautiful bare bones of these weathered beams. No need for screws or glue to hold things together, gravity will do the job. We love a design where you can, at a glance, see how it works.These straight talking dovetail beam benches are built by hand from reclaimed weathered spruce. The oversized dovetail joint connects the oversized legs to the oversized bench. This will easily support your oversized guests.
Just one of these benches in your home is enough to bring a solid grounded energy. You'll be reminded daily that you are here to stay, not messing around, and your guests will know it too.
The simple design also serves to highlight the rich detail of the weathering and saw marks on the beams.
We make this design in standard sizes 4', 6', 8' and any custom size up to 11'6".
